| |
I need a manual for working with the Philips cell phones
We endeavour to develop the biggest and the best support area for all our custumers. We have also a big support data-base. Here you will found the full information about the box and software. We are constantly making new discriptions. Please, spare some time to check the new addons.
Philips section: http://www.multi-box.net/docs.php?folder=15
Where can I find full discriptions of the box?
We endeavour to develop the biggest and the best support area for all our custumers. We have also a big support data-base. Here you will found all info about the box, software. All the software and box discriptions can be found in:
Box descriptions: http://www.multi-box.net/docs.php?folder=13
Where can I find the software discriptions?
We endeavour to develop the biggest and the best support area for all our custumers. We have also a big support data-base. All softwares and box discriptions you can found in:
Support docs area: http://www.multi-box.net/docs.php
What other models will be supported by Multi-box LITE?
The structure of our box is universal and combines all the necessary things. They are standard Unibox which allows you work with any phones, JTAG which restores Boot zone of unoperating phones and NOKIA interface which provides you with the striking opportunity to work with ALL NOKIA cell phones. All this proves that Multi-box LITE is unique in its sort. We will add new platforms in further updates.
What cables approach to work with the "Unibox" functon?
Most of the cables from other universal boxes approaches to Multi-box. This is very favourable for those who already has universal box. Now you may use one set of cables for several boxes.

What does "can work as Unibox" mean?
"Can work as Unibox" means that Unibox is implemented in the given product. Besides the whole basic software, you may use Multi-box LITE as an ordinary USB Unibox. It can also work with any software which approaches to USB box. Moreover - most of the cables from other universal boxes approaches to our product. This is very favourable for those who already have universal box. Now you may use one set of cables for several boxes. UniBox Universal Unlocking Box is basic device in each GSM service. Using this function you can do flashing, unlocking, diagnostic, repair, load any content (logo, wallpaper, tones, games etc.)
UniBox supports the following phone brands: Alcatel, Benq, Bosch, Ericsson, LG, Mitsubishi, Motorola, Nec, Panasonic, Samsung, Sagem, Sharp, Siemens, Sony, Toshiba, VK and many others.
Totaly supports over 400 different models.
You can manually switch between FBUS and MBUS
Optional 5V test voltage for flashing some Phones like Trium and Ericsson
Power supply is taken from USB
Supports remote unlocking service
Indication LED`s for TX, RX, Power, Flash Supply
Very fast ~1 Mb
What is the JTAG and what is it necessary for?
JTAG (Joint Test Action Group) - The interface for debugging and development, used in microprocessor systems. JTAG uses the synchronous consecutive busbar which operates as a circuit by means of all devices which support JTAG in target object. Connection with microcircuits is called TAP (Test Access Point). It is the report with output of addresses to the device with saving information about this device, allowing to choose several circuits to target object or address space. Every type of circuit can have different length and address space and data is transfered consecutivly. Knowing the architecture of the busbar, instructions of the processor and its registers, it is possible to change the data in the programm areas, such as BOOT, Eeprom, FirmWare Area. Using such interface with system card on ARM (Advanced RISC Machines) processor (Mobile phone or Pocket PC) you can restore a damaged boot area or flash separate part of an area, this allows to leave untouched zone with unique data, for example EEPROM. Using this interface and our software you will be able to restore such mobel phones as Panasonic, Sendo, VK-Mobile.
What port is the Multi-box LITE connected through?
Working with the PC, Multi-box LITE connects through USB port. Power supply is brought through this port too. This option lets you flash phones on high speeds - 921600.
Will updates be free of charge?
All updates for the phones mentioned in the basic set will always be free of charge. If you have activated Activation Pack #1 and/or Activation Pack #2, than all updates and addones for them will be absolutely free as well.
How can I get access to support area?
All you need to do is just to download and start the Shell tool, than press "Go To Support Area - Main" button and you will automatically get access to support area (that means to Official Support site, Documentation, Manual, Schematics, Support Forum):

* - fields, obligatory for filling
|
|